Products
Model: 5R Cal
Calf and Sheep Haysaver Feeder
This feeder is the smallest of our round bale feeders. It stands 5½ feet tall, is 5½ feet in diameter, and has a neck rail height of 16″. This feeder can accommodate a round bale no larger than 4′ in diameter. It is also available with no floor.
Model: 7R RB
7′ Series Haysaver Feeder
This feeder is designed for young animals that are not able to reach the center of an 8′ feeder. The 7′ feeder will not accommodate a 5′ round bale. The Standard, ½ Bar, Removable Bar and No Floor, and No Skid are all available as a 7′ feeder. The height is 6½ feet with the neck rail […]
Model: 81 BR
Heavy Duty Bale Ring Feeders
This feeder comes as a single piece or 2 pieces in 6′, 7′, or 8′ in diameter. We offer them with 12″ or 15″ slanted bar spacing. They can also be built with strait bars and loops for horses.
Model: 8R ½Bar
½ Bar Haysaver Feeder
This feeder is 8′ in diameter and stands 6½ feet high with the neck rail at 26″ for full grown animals. It has a treated plywood floor and sits on 2″ pipe skids. With every other bar out inside the basket, it is designed for feeding 5′ round high moisture or silage bales. This feeder is also […]
Model: 8R HR
Horse Haysaver Feeder
This feeder is designed to feed large animals. It stands 7’4″ tall and has a neck rail of 36″. The bars on the outside are in a vertical position to keep the horse from hitting its neck on the bar. There are 19 feed spaces around this feeder, with the bars placed on 17″ centers.
Model: 8R LP
Low Profile Haysaver Feeder
This feeder is designed for the short-legged animals. It stands only 6′ high with the neck rail at 20″. This feeder can also be built as a ½ bar, no floor, no skid or no skid or skids but no floor. The standard Low Profile Haysaver Feeder is 8′ in diameter and holds one 5′ […]
Model: 8R NFNS
NFNS Haysaver Feeder
This feeder is 8′ diameter (like Model 8R HR) but has no floor and no skids. This feeder is recommended for feeding on cemented areas. It is available as a ½ bar feeder for high moisture bales and is also available with skids, but no floor.
Model: 8R RB
Removable Bar Haysaver Feeder
This feeder was designed for the farmer who feeds both dry bales and high moisture or silage bales. Every other bar inside the basket can be removed when feeding silage bales, then bolted back in for feeding dry bales. This feeder is available with a floor and skids, no floor and no skids or a rubber […]
Model: 8R ST
Standard Haysaver Feeder
This feeder is 8′ in diameter and stands 6½ feet high with the neck rail at 26″. It comes with a treated plywood floor and sits on 2″ pipe skids. The feeder is designed for full grown cattle and for feeding 5′ round, dry hay bales.
Model: RTB Std
Rubber Tire Base Haysaver Feeder
This feeder is built from the same schedule-40 pipe as our standard J&L Haysaver Feeder. The top is mounted on a heavy rubber tire base that will not rust of corrode. This feeder has no floor, and the rubber base sits directly on the ground. It is available in Standard, ½ Bar, Removable Bar, or for […]
Model: Super FLSK
“Super Haysaver” Feeder
This feeder is designed to handle the large square bales, as well as the round bales. It is 7′ wide and 12′ long with an 8′ long hay basket. It stands 6½ feet high with the neck rail at 26″. It is available on skids, with a treated plywood floor or with no floor and no skids. It […]
Model: TO Std
“Tops Only” Haysaver Feeder
These feeders are available for anyone who would like to make their own bottom section to mount the tops on. These are available in Standard, ½ Bar, Removable Bar and for the 5½ ft. diameter calf Haysaver.